Market Segments | Schlumberger Products

Market Segments

Valves used in a variety of applications

Cameron valves are used to direct, measure, and control the flow of oil and gas as they are moved from individual wellheads through flowlines, gathering lines, and transmission systems to refineries, petrochemical plants, and industrial centers for processing.

Through innovative organic development and strategic acquisition, we have built a broad portfolio of valves that service the demands of global drilling, production, pipeline, storage, transmission, and critical-service applications.

Pipeline in the field.

Low Emissions

Global emissions compliance over the full valve life cycle.

GROVE B7

Side-entry ball valve

1 1/2- to 20-in sizes, ANSI 2500.

GROVE IST

Integrated seat technology ball valve

Overcome ball flexing to 10,000 psi.

NUTRON T3

Floating ball valves

Full- and reduced-port designs, ASME 150 to 2500.

WKM 370D Series

Trunnion-mounted ball valves

Variety of ANSI and API Spec 6D designs.

CAMERON T30 Series

Fully welded ball valve

Superior stem sealing performance compliant with LE environmental standards.

GROVE B4

Side-entry ball valve

1 1/2- to 4-in sizes, ANSI 150 to 1500.

GROVE B5

Side-entry ball valve

6- to 60-in sizes, ANSI 150 to 1500.

WKM 320 Series

Floating ball valves

Internal cavity relief while maintaining bidirectional sealing capability.

Triple Offset Valve

Reliable, repeatable isolation performance

Incorporates true triple-offset geometry to provide bubble-tight sealing.

GENERAL VALVE Twin Seal

Plug valve

Enact a bubble-tight verifiable dual seal without seal abrasion.

WKM Pow-R-Seal

Double expanding gate valve

One of the most trusted gate valves.

WKM Saf-T-Seal

Slab gate valve

Simple, rugged, and reliable through-conduit valve.

Cast-Steel NEWCO

Gate, globe, and check valves

2- to 60-in sizes and raised-flange, ring-type joint, and butt-weld end connection options.

Forged-Steel NEWCO

Gate, globe, and check valves

Ideal for downstream applications and critical power-industry applications.

Pressure-Seal NEWCO

Gate, globe, and check valves

Tighter contact and no body and bonnet flanges.

Stainless Steel NEWCO

Gate, globe, and check valves

Standardized production for uniform quality.

Subsea

Challenging conditions and depths.

Chainwheel Adapters

Where direct operation isn't an option

Cast-iron construction.

DYNATORQUE D-Lock

Valve-locking device

Prevent valve rotation.

DYNATORQUE D-Stop

Partial-stroke test device

For use in automated quarter-turn valve applications.

Ground-Position Indicators

Clear indication of valve status

Visually indicate the position of a buried or otherwise hidden valve.

Handwheels

Suited for Cameron products

6- to 48-in sizes, many in recessed or flat versions.

DYNATORQUE SRD

Nondeclutchable manual override

For spring-return applications.

DYNATORQUE SD

Declutchable manual override

Used with pneumatic, hydraulic, and backdrivable electric actuators.

DYNATORQUE 360

Multiturn worm-gear operator

Commercial-grade, worm-geared, and made for multiple output turns.

AWWA-Grade DYNATORQUE 90

Quarter-turn worm-gear operator

Meet AWWA Spec C504.

Commercial Aluminum DYNATORQUE 90

Quarter-turn worm-gear operators

Aluminum standard housing material.

Industrial DYNATORQUE 90

Quarter-turn worm-gear operator

Meet marine, submerged, and high- and low-temperature requirements.

Stainless Steel DYNATORQUE 90

Quarter-turn worm-gear operators

300 series stainless steel unit housings, covers, indicators, and more.

DYNATORQUE BG

Multiturn bevel-gear operator

20 different frame and spur combinations.

DYNATORQUE DT

Quarter-turn severe-service gear operator

For aggressive environmental conditions or corrosive applications.

Spurs & Miters

Heavy-duty iron and steel

Use as add-on features to gears or as stand-alone products.

SD Locking Device

For manual overrides

Avoid inadvertent handwheel rotation.

DT, SRD, and BG Locking Devices

For quarter-turn, multiturn, and bevel-gear operators

Avoid inadvertent handwheel rotation.

Drilling

Land and offshore drilling applications.

5,000-psi DEMCO DM

Valve

Achieve dependable, heavy-duty performance in abrasive service conditions.

7,500-psi DEMCO DM

Valve

Meet the 7,500-psi working pressure demands of deep well drilling.

DEMCO NE-C

Butterfly valve

2- to 36-in, one-piece body.

DEMCO NE-D

Butterfly valve

2- to 12-in, short-neck design.

DEMCO NE-I

Butterfly valve

2 to 12 in, for a range of industries.

DEMCO NF-C

Butterfly valve

14 through 36 in, available in both wafer and lug styles.

DEMCO DT and DB

Valves

Optimize operations in corrosive CO2 injection and waterflood applications.

NAVCO C1

Floating ball valve

1/4- to 2-in sizes, 2,000-psi max. operating pressure.

NAVCO H1L

Floating ball valve

1/4- to 2-in sizes, 150-psi saturated stem.

NAVCO S10

Floating ball valve

One-piece flanged-end ball valve, reduced port.

NAVCO S20

Floating ball valve

Two-piece threaded-end ball valve, full port, 2,000-psi working pressure.

NAVCO S30

Floating ball valve

Three-piece, threaded-end economy ball valves, fire tested and inline repairable.

Critical-Service Production

Corrosive and HPHT environments.

Chainwheel Adapters

Where direct operation isn't an option

Cast-iron construction.

DYNATORQUE D-Lock

Valve-locking device

Prevent valve rotation.

DYNATORQUE D-Stop

Partial-stroke test device

For use in automated quarter-turn valve applications.

Ground-Position Indicators

Clear indication of valve status

Visually indicate the position of a buried or otherwise hidden valve.

Handwheels

Suited for Cameron products

6- to 48-in sizes, many in recessed or flat versions.

DT, SRD, and BG Locking Devices

For quarter-turn, multiturn, and bevel-gear operators

Avoid inadvertent handwheel rotation.

SD Locking Device

For manual overrides

Avoid inadvertent handwheel rotation.

Memory-Stop Device

DYNATORQUE accessory

For when valves or dampers must be opened/closed to same position.

DYNATORQUE 360

Multiturn worm-gear operator

Commercial-grade, worm-geared, and made for multiple output turns.

AWWA-Grade DYNATORQUE 90

Quarter-turn worm-gear operator

Meet AWWA Spec C504.

Commercial Aluminum DYNATORQUE 90

Quarter-turn worm-gear operators

Aluminum standard housing material.

Industrial DYNATORQUE 90

Quarter-turn worm-gear operator

Meet marine, submerged, and high- and low-temperature requirements.

Stainless Steel DYNATORQUE 90

Quarter-turn worm-gear operators

300 series stainless steel unit housings, covers, indicators, and more.

DYNATORQUE BG

Multiturn bevel-gear operator

20 different frame and spur combinations.

DYNATORQUE DT

Quarter-turn severe-service gear operator

For aggressive environmental conditions or corrosive applications.

DYNATORQUE SD

Declutchable manual override

Used with pneumatic, hydraulic, and backdrivable electric actuators.

DYNATORQUE SRD

Nondeclutchable manual override

For spring-return applications.

Spurs & Miters

Heavy-duty iron and steel

Use as add-on features to gears or as stand-alone products.

ENTECH DRV-Z

Nozzle check valve

Small-bore valve designed for use in piping systems.

GROVE B4

Side-entry ball valve

1 1/2- to 4-in sizes, ANSI 150 to 1500.

GROVE B5

Side-entry ball valve

6- to 60-in sizes, ANSI 150 to 1500.

GROVE B7

Side-entry ball valve

1 1/2- to 20-in sizes, ANSI 2500.

GROVE B8

Fully welded ball valve

2- to 60-in sizes, ANSI 150 to 2500.

GROVE BT1

Top-entry ball valve

1/2- to 12-in sizes, ANSI 150 to 1500.

GROVE BT2

Top-entry ball valve

1 1/2- to 60-in sizes, ANSI 150 to 2500.

GROVE IST

Integrated seat technology ball valve

Overcome ball flexing to 10,000 psi.

Compact LEDEEN Actuators

Customer-focused solutions

Save valuable space with one of the smallest compact actuators on the market.

Hydraulic LEDEEN Actuators

Quarter-turn and linear designs

Achieve on-off modulating control of multiple valve types.

Pneumatic LEDEEN Actuators

Linear and quarter-turn models

Reliably perform with compressed air, natural gas, or nitrogen actuator supply.

LEDEEN SCCS

Self-contained control system

Ensure reliable valve shutdown when an external powersource is unavailable.

Electric LEDEEN Actuators

DiM series

Use electric actuation for valve automation in hazardous locations.

Subsea LEDEEN Actuators

Control and actuation of subsea valves

Choose from double-acting or spring-return designs for shallow or deep water.

Declutch and Manual Overrides

MAXTORQUE products

Reduces rim pull by up to 75%.

Rising Stem Applications

High-ratio, small-envelope, robust

See our MAXTORQUE products for rising stem applications.

Severe-Service Applications

For saltwater, steam, and corrosive environments

Reduce turns to close and rim pull by 75% in critical environments.

Subsea Applications

Active and passive pressure-compensation systems

Withstand high pressures and deep water depths with MAXTORQUE products.

Temperature Compensators

For new or retrofit projects

Extend valve life and reduce NPT and downtime.

Worm-Gear Operator

MAXTORQUE products

75% less work to operate a valve.

NUTRON T3

Floating ball valves

Full- and reduced-port designs, ASME 150 to 2500.

NUTRON TM

Metal-seated trunnion-mounted ball valve

Heavy oil, high-temperature steam, and abrasive slurry applications.

TK

Trunnion-mounted ball valve

Robust design, sealing areas, and stainless steel overlays.

D Series

TEXSTEAM plug valves

Save repair time and money with top-entry, infield- repairable designs.

Standard Production

Separation, metering, tank battery, wastewater, and EOR.

Chainwheel Adapters

Where direct operation isn't an option

Cast-iron construction.

DYNATORQUE D-Lock

Valve-locking device

Prevent valve rotation.

DYNATORQUE D-Stop

Partial-stroke test device

For use in automated quarter-turn valve applications.

Ground-Position Indicators

Clear indication of valve status

Visually indicate the position of a buried or otherwise hidden valve.

Handwheels

Suited for Cameron products

6- to 48-in sizes, many in recessed or flat versions.

DT, SRD, and BG Locking Devices

For quarter-turn, multiturn, and bevel-gear operators

Avoid inadvertent handwheel rotation.

SD Locking Device

For manual overrides

Avoid inadvertent handwheel rotation.

Memory-Stop Device

DYNATORQUE accessory

For when valves or dampers must be opened/closed to same position.

AWWA-Grade DYNATORQUE 90

Quarter-turn worm-gear operator

Meet AWWA Spec C504.

Commercial Aluminum DYNATORQUE 90

Quarter-turn worm-gear operators

Aluminum standard housing material.

Industrial DYNATORQUE 90

Quarter-turn worm-gear operator

Meet marine, submerged, and high- and low-temperature requirements.

Stainless Steel DYNATORQUE 90

Quarter-turn worm-gear operators

300 series stainless steel unit housings, covers, indicators, and more.

DYNATORQUE BG

Multiturn bevel-gear operator

20 different frame and spur combinations.

DYNATORQUE DT

Quarter-turn severe-service gear operator

For aggressive environmental conditions or corrosive applications.

DYNATORQUE SD

Declutchable manual override

Used with pneumatic, hydraulic, and backdrivable electric actuators.

DYNATORQUE SRD

Nondeclutchable manual override

For spring-return applications.

Spurs & Miters

Heavy-duty iron and steel

Use as add-on features to gears or as stand-alone products.

ENTECH DRV-Z

Nozzle check valve

Small-bore valve designed for use in piping systems.

GROVE B4

Side-entry ball valve

1 1/2- to 4-in sizes, ANSI 150 to 1500.

GROVE B5

Side-entry ball valve

6- to 60-in sizes, ANSI 150 to 1500.

GROVE B7

Side-entry ball valve

1 1/2- to 20-in sizes, ANSI 2500.

GROVE B8

Fully welded ball valve

2- to 60-in sizes, ANSI 150 to 2500.

GROVE BT1

Top-entry ball valve

1/2- to 12-in sizes, ANSI 150 to 1500.

GROVE BT2

Top-entry ball valve

1 1/2- to 60-in sizes, ANSI 150 to 2500.

Hydraulic LEDEEN Actuators

Quarter-turn and linear designs

Achieve on-off modulating control of multiple valve types.

Pneumatic LEDEEN Actuators

Linear and quarter-turn models

Reliably perform with compressed air, natural gas, or nitrogen actuator supply.

LEDEEN SCCS

Self-contained control system

Ensure reliable valve shutdown when an external powersource is unavailable.

Electric LEDEEN Actuators

DiM series

Use electric actuation for valve automation in hazardous locations.

Subsea LEDEEN Actuators

Control and actuation of subsea valves

Choose from double-acting or spring-return designs for shallow or deep water.

Worm-Gear Operator

MAXTORQUE products

75% less work to operate a valve.

Declutch and Manual Overrides

MAXTORQUE products

Reduces rim pull by up to 75%.

Rising Stem Applications

High-ratio, small-envelope, robust

See our MAXTORQUE products for rising stem applications.

Severe-Service Applications

For saltwater, steam, and corrosive environments

Reduce turns to close and rim pull by 75% in critical environments.

Subsea Applications

Active and passive pressure-compensation systems

Withstand high pressures and deep water depths with MAXTORQUE products.

Temperature Compensators

For new or retrofit projects

Extend valve life and reduce NPT and downtime.

NUTRON T3

Floating ball valves

Full- and reduced-port designs, ASME 150 to 2500.

NUTRON TM

Metal-seated trunnion-mounted ball valve

Heavy oil, high-temperature steam, and abrasive slurry applications.

Super G

TEXSTEAM plug valves

Resist corrosion and high impact and achieve bubble-tight sealing.

WHEATLEY Series 500

Check valve

Full-open, through-conduit design for low pressure drop and less turbulence.

WHEATLEY Series 822

Check valve

Beveled, self-aligning clapper and seat design.

Short-Pattern Wafer WHEATLEY

Check valve

Lightweight, compact design for backflow prevention.

WKM 370D Series

Trunnion-mounted ball valves

Variety of ANSI and API Spec 6D designs.

WKM 210A

Floating ball valves

Two-piece design with a ductile iron body and tailpiece.

WKM 310C5

Floating ball valves

5,000-psi working pressures and optional NACE MR0175 rating.

WKM Model 310F

Floating ball valves

The Cameron WKM Model 310F floating ball valve satisfies a wide range of applications.

WKM C50

Floating ball valves

Two-piece threaded end valve, fire tested and certified to API Spec 607.

High-Performance Double Offset WKM Valve

Heavy-duty design

Maintenance-free operation you can count on.

Gas Transmission & Storage

Mid- and downstream.

CAMERON T30 Series

Fully welded ball valve

Superior stem sealing performance compliant with LE environmental standards.

Chainwheel Adapters

Where direct operation isn't an option

Cast-iron construction.

DYNATORQUE D-Lock

Valve-locking device

Prevent valve rotation.

DYNATORQUE D-Stop

Partial-stroke test device

For use in automated quarter-turn valve applications.

Ground-Position Indicators

Clear indication of valve status

Visually indicate the position of a buried or otherwise hidden valve.

Handwheels

Suited for Cameron products

6- to 48-in sizes, many in recessed or flat versions.

DT, SRD, and BG Locking Devices

For quarter-turn, multiturn, and bevel-gear operators

Avoid inadvertent handwheel rotation.

SD Locking Device

For manual overrides

Avoid inadvertent handwheel rotation.

Memory-Stop Device

DYNATORQUE accessory

For when valves or dampers must be opened/closed to same position.

DYNATORQUE 360

Multiturn worm-gear operator

Commercial-grade, worm-geared, and made for multiple output turns.

AWWA-Grade DYNATORQUE 90

Quarter-turn worm-gear operator

Meet AWWA Spec C504.

Commercial Aluminum DYNATORQUE 90

Quarter-turn worm-gear operators

Aluminum standard housing material.

Stainless Steel DYNATORQUE 90

Quarter-turn worm-gear operators

300 series stainless steel unit housings, covers, indicators, and more.

DYNATORQUE BG

Multiturn bevel-gear operator

20 different frame and spur combinations.

DYNATORQUE DT

Quarter-turn severe-service gear operator

For aggressive environmental conditions or corrosive applications.

DYNATORQUE SD

Declutchable manual override

Used with pneumatic, hydraulic, and backdrivable electric actuators.

DYNATORQUE SRD

Nondeclutchable manual override

For spring-return applications.

Spurs & Miters

Heavy-duty iron and steel

Use as add-on features to gears or as stand-alone products.

ENTECH DRV-BN

Nozzle check valve

Large-bore design for compressor and pumping stations.

ENTECH DRV-Z

Nozzle check valve

Small-bore valve designed for use in piping systems.

GROVE B4

Side-entry ball valve

1 1/2- to 4-in sizes, ANSI 150 to 1500.

GROVE B5

Side-entry ball valve

6- to 60-in sizes, ANSI 150 to 1500.

GROVE B7

Side-entry ball valve

1 1/2- to 20-in sizes, ANSI 2500.

GROVE B8

Fully welded ball valve

2- to 60-in sizes, ANSI 150 to 2500.

GROVE BT1

Top-entry ball valve

1/2- to 12-in sizes, ANSI 150 to 1500.

GROVE BT2

Top-entry ball valve

1 1/2- to 60-in sizes, ANSI 150 to 2500.

Direct-Gas LEDEEN Actuators

Efficient modular assembly

Achieve on-off control of ball or plug valves.

Gas-Over-Oil LEDEEN Actuators

Double-acting models

Enhance flexibility with consistent engineering and efficient modularity.

Hydraulic LEDEEN Actuators

Quarter-turn and linear designs

Achieve on-off modulating control of multiple valve types.

Pneumatic LEDEEN Actuators

Linear and quarter-turn models

Reliably perform with compressed air, natural gas, or nitrogen actuator supply.

LEDEEN SCCS

Self-contained control system

Ensure reliable valve shutdown when an external powersource is unavailable.

Electric LEDEEN Actuators

DiM series

Use electric actuation for valve automation in hazardous locations.

Subsea LEDEEN Actuators

Control and actuation of subsea valves

Choose from double-acting or spring-return designs for shallow or deep water.

Worm-Gear Operator

MAXTORQUE products

75% less work to operate a valve.

Declutch and Manual Overrides

MAXTORQUE products

Reduces rim pull by up to 75%.

Rising Stem Applications

High-ratio, small-envelope, robust

See our MAXTORQUE products for rising stem applications.

Severe-Service Applications

For saltwater, steam, and corrosive environments

Reduce turns to close and rim pull by 75% in critical environments.

Subsea Applications

Active and passive pressure-compensation systems

Withstand high pressures and deep water depths with MAXTORQUE products.

Temperature Compensators

For new or retrofit projects

Extend valve life and reduce NPT and downtime.

Piston-Style TOM WHEATLEY

Check valve

Nonslam, reliable operation that stands up to excessive wear.

Swing-Style TOM WHEATLEY

Check valve

Backflow prevention without actuation.

WHEATLEY Series 500

Check valve

Full-open, through-conduit design for low pressure drop and less turbulence.

WHEATLEY Series 822

Check valve

Beveled, self-aligning clapper and seat design.

Short-Pattern Wafer WHEATLEY

Check valve

Lightweight, compact design for backflow prevention.

Triple Offset Valve

Reliable, repeatable isolation performance

Incorporates true triple-offset geometry to provide bubble-tight sealing.

Liquid Transmission & Storage

Mid- and downstream.

CAMERON T30 Series

Fully welded ball valve

Superior stem sealing performance compliant with LE environmental standards.

Chainwheel Adapters

Where direct operation isn't an option

Cast-iron construction.

DYNATORQUE D-Lock

Valve-locking device

Prevent valve rotation.

DYNATORQUE D-Stop

Partial-stroke test device

For use in automated quarter-turn valve applications.

Ground-Position Indicators

Clear indication of valve status

Visually indicate the position of a buried or otherwise hidden valve.

Handwheels

Suited for Cameron products

6- to 48-in sizes, many in recessed or flat versions.

DT, SRD, and BG Locking Devices

For quarter-turn, multiturn, and bevel-gear operators

Avoid inadvertent handwheel rotation.

SD Locking Device

For manual overrides

Avoid inadvertent handwheel rotation.

Memory-Stop Device

DYNATORQUE accessory

For when valves or dampers must be opened/closed to same position.

DYNATORQUE 360

Multiturn worm-gear operator

Commercial-grade, worm-geared, and made for multiple output turns.

AWWA-Grade DYNATORQUE 90

Quarter-turn worm-gear operator

Meet AWWA Spec C504.

Commercial Aluminum DYNATORQUE 90

Quarter-turn worm-gear operators

Aluminum standard housing material.

Industrial DYNATORQUE 90

Quarter-turn worm-gear operator

Meet marine, submerged, and high- and low-temperature requirements.

Stainless Steel DYNATORQUE 90

Quarter-turn worm-gear operators

300 series stainless steel unit housings, covers, indicators, and more.

DYNATORQUE BG

Multiturn bevel-gear operator

20 different frame and spur combinations.

DYNATORQUE SD

Declutchable manual override

Used with pneumatic, hydraulic, and backdrivable electric actuators.

DYNATORQUE SRD

Nondeclutchable manual override

For spring-return applications.

Spurs & Miters

Heavy-duty iron and steel

Use as add-on features to gears or as stand-alone products.

ENTECH DRV-BN

Nozzle check valve

Large-bore design for compressor and pumping stations.

ENTECH DRV-Z

Nozzle check valve

Small-bore valve designed for use in piping systems.

GENERAL VALVE Four-Way

Diverter valves

Achieve positive sealing without relying on line or hydraulic pressure.

Seat and Reseat

Plug valves

Eliminate line draining, line flushing, vacuum trucks, and product losses.

GENERAL VALVE Twin Seal

Plug valve

Enact a bubble-tight verifiable dual seal without seal abrasion.

Large-Bore Fabricated GROVE

Valve

Enhance technical reliability in pipeline transmission and storage applications.

Small-Bore Fabricated GROVE

Valve

Through-conduit and double block-and-bleed functionality.

GROVE B4

Side-entry ball valve

1 1/2- to 4-in sizes, ANSI 150 to 1500.

GROVE B5

Side-entry ball valve

6- to 60-in sizes, ANSI 150 to 1500.

GROVE B7

Side-entry ball valve

1 1/2- to 20-in sizes, ANSI 2500.

GROVE B8

Fully welded ball valve

2- to 60-in sizes, ANSI 150 to 2500.

GROVE BT1

Top-entry ball valve

1/2- to 12-in sizes, ANSI 150 to 1500.

GROVE BT2

Top-entry ball valve

1 1/2- to 60-in sizes, ANSI 150 to 2500.

GROVE G12

Valve

Through-conduit gate valve with a cast body, fully compliant with API Spec 6D.

Direct-Gas LEDEEN Actuators

Efficient modular assembly

Achieve on-off control of ball or plug valves.

Gas-Over-Oil LEDEEN Actuators

Double-acting models

Enhance flexibility with consistent engineering and efficient modularity.

Hydraulic LEDEEN Actuators

Quarter-turn and linear designs

Achieve on-off modulating control of multiple valve types.

Pneumatic LEDEEN Actuators

Linear and quarter-turn models

Reliably perform with compressed air, natural gas, or nitrogen actuator supply.

LEDEEN SCCS

Self-contained control system

Ensure reliable valve shutdown when an external powersource is unavailable.

Electric LEDEEN Actuators

DiM series

Use electric actuation for valve automation in hazardous locations.

Subsea LEDEEN Actuators

Control and actuation of subsea valves

Choose from double-acting or spring-return designs for shallow or deep water.

Worm-Gear Operator

MAXTORQUE products

75% less work to operate a valve.

Declutch and Manual Overrides

MAXTORQUE products

Reduces rim pull by up to 75%.

Rising Stem Applications

High-ratio, small-envelope, robust

See our MAXTORQUE products for rising stem applications.

Severe-Service Applications

For saltwater, steam, and corrosive environments

Reduce turns to close and rim pull by 75% in critical environments.

Subsea Applications

Active and passive pressure-compensation systems

Withstand high pressures and deep water depths with MAXTORQUE products.

Temperature Compensators

For new or retrofit projects

Extend valve life and reduce NPT and downtime.

Piston-Style TOM WHEATLEY

Check valve

Nonslam, reliable operation that stands up to excessive wear.

Swing-Style TOM WHEATLEY

Check valve

Backflow prevention without actuation.

WHEATLEY Series 500

Check valve

Full-open, through-conduit design for low pressure drop and less turbulence.

WHEATLEY Series 822

Check valve

Beveled, self-aligning clapper and seat design.

Short-Pattern Wafer WHEATLEY

Check valve

Lightweight, compact design for backflow prevention.

WKM Pow-R-Seal

Double expanding gate valve

One of the most trusted gate valves.

WKM Saf-T-Seal

Slab gate valve

Simple, rugged, and reliable through-conduit valve.

Triple Offset Valve

Reliable, repeatable isolation performance

Incorporates true triple-offset geometry to provide bubble-tight sealing.

Process, Refining & Petrochemical

Gas processing, LNG, and NGL.

Cast-Steel NEWCO

Gate, globe, and check valves

2- to 60-in sizes and raised-flange, ring-type joint, and butt-weld end connection options.

Forged-Steel NEWCO

Gate, globe, and check valves

Ideal for downstream applications and critical power-industry applications.

Pressure-Seal NEWCO

Gate, globe, and check valves

Tighter contact and no body and bonnet flanges.

Stainless Steel NEWCO

Gate, globe, and check valves

Standardized production for uniform quality.

ORBIT

Rising stem ball valve

When zero leakage and frequent operation are demanded.

Triple Offset Valve

Reliable, repeatable isolation performance

Incorporates true triple-offset geometry to provide bubble-tight sealing.

DOUGLAS CHERO and DOUGLAS ITALIA

Gate, globe and check valves and steam traps and strainers

Ideal for downstream applications.

View All

Share This